14RR---26302R11 fail locked electric strike

Model with monitoring contact as potential-free changeover contact. This is actuated via a latch bolt slider. Door strike can be adjusted in the striking plate, thus making installation work a great deal easier.

  • Suitable for all common striking plates
  • Can be combined with striking plates with latch guide (model St.)
  • Reversible design = DIN right (DR=5)

Voltage: 8-16 V AC/DC
Adjustable electric strike (F, Fix): Yes
Monitoring contact (RR): Yes
Fail-locked: Yes
Break-in resistance: 5000 N
Height: 112 mm
Width: 20,5 mm
Depth: 27,8 mm
Operating temperature range: -15 °C to +40 °C
Installation position: vertical and horizontal
Material housing: Die-cast zinc
Latch material: Steel Rated resistance: 16,50 Ω
DC-operating noise 8 V: 350 mA
AC current consumption 12 V: 500 mA
AC-current consumption 16 V: 700 mA
DC-current consumption (50% Residual ripple) 8 V: 470 mA
DC-current consumption (50% Residual ripple) 12 V: 710 mA
DC-current consumption (50% Residual ripple) 16 V: 940 mm
DC-current consumption (stabilized) 8 V: 485 mA
DC-current consumption (stabilized) 12 V: 725 mA
DC-current consumption (stabilized) 16 V: 970 mA
AC operating noise: loud [4]
DC-operating noise : low [1]
Max. latch preload AC operation 8 V: 110 N
Max. latch preload AC operation 12 V: 80 N
Max. latch preload AC operation 16 V: 100 N
Max. keep pre-load DC (50% Residual ripple) 8 V: 10 N
Max. latch preload DC (50% ripple) 12 V: 20 N
Max. latch preload DC (50% ripple) 16 V: 40 N Max. latch preload DC (stabilised) 8 V: 10 N
Max. latch preload DC (stabilised) 12 V: 10 N Max. latch preload DC (stabilised) 16 V: 20 N